| ||
| led lighting stories and DIY discussion |
| ||
China,
outdoor lighting street lighting represents about 30% of consumption,
production and life are closely related to people.
Street
lighting LED as important outdoor applications, their advantages:
1, long
life high power street LED lighting
We are
very concerned about this issue, the focus, as many foreign experts and product
brochure describes the company's 5-10 million hours, and optimistic, in fact,
high power LED street life of the lamp depends on the following:
(1)
Quality of the light source LED chips, light attenuation.
(2) The
quality of the LED package.
(3)
led
light bulbs source such as a cold, but the LED semiconductor will
generate heat. LED cooling to ensure good working conditions for the LED.
(4)
Power supply, lifetime warranty constant current driver.
2, the
energy efficiency of lighting is a systematic project, if obvious, such as
lighting or mood lighting is by electricity into light, and through
3,
conventional semiconductor LED lamps lighting the lamp differentiation is a
light source, 12v
led power supply, screen and other accessories such as a combination
of lighting equipment assembly, is also used to control the light source,
projection lights, while protecting the light source lighting to improve lighting
efficiency tool.
Conventional
street lighting is mainly made by the lamp housing, the cavity light source,
electrical rooms and other components. Because there is enough space and the
carbon foam and silicone rubber seals to install the heat, ensuring the working
conditions of light. Conventional street lighting to ensure this protection,
provided that the conditions can be molded into any form, conventional China
LED
lights with different traditions, has a point light source, high brightness and
narrow beam output and so on. LED lights do first to consider using mass flow
exposure limited to the actual scope of the requirements is the road lighting;
road space is not beyond the effective range of lighting. Therefore, effective
control of light distribution, so that some smd
3528 LED light emitted as a long strip of light along the surface
with the direction of propagation, while taking care of the generation of reflections,
is The LED lighting designers made the new and higher requirements.
| ||
| Permanent Link |
| ||
|
Today increasingly are moving over to LED lights in the past. LED lights have been around for a while, however, that only happened that can be used in homes and gardens. The reason for the sudden public attention to LED lights is due to its efficiency, durability and attractive. Light also requires less energy than compact fluorescent lamps (CFL) and incandescent lights. For this reason, ideal for accent lighting, LED spotlight fixture and home decor. If you are considering the use of LED lights in your home, you might like to consider getting some strips of LED light to play. What are LED lights Bars? LED light bars are primarily bars that could be composed of equal LED lights.  LED lights are different from other surfaces such as LED light bars out with the movement of electrons in the semiconductor material, not through heat as with incandescent bulbs. This means that only requires about 3 watts to provide off the equivalent light as a 20 watt incandescent bulb. LED lighting is also of direction, which is ideal for spotlights and accent lighting. You will discover there are currently two different types of LED light bars to choose from: rigid and flexible. Rigid rods, rigid LED light bars wherever you may have a very straight, although the lighting strip. By way of example, these are perfect for long hallways that could line the sides straight. They are ideal to place under the kitchen cabinets, which gives more surface illumination on its counters. The burdens of rigid LED light now have a new adhesive, making them incredibly easy to put up and defeat. What this means is that you will be able to test the lighting in the home before making your final decision on where to place other LED lights.Flexible LED strips are good for outdoor use where there are fewer requirements for lights straight. They can be used to cover outdoor furniture and even to cover all the branches of a large tree. For any of the fun parts feel, consider using flexible strips of light in various colors and mixes them all up. You can also use the LED strip lighting inside the house. They are great for bending around corners, highlighting the bottom of furniture or even bedroom doors frame. LED light strips are a great way to add a little sparkle and color to any space indoors or outdoors. The accessibility and simplicity of these lights mean you will be able to experiment with the lighting without a large investment in time or money. You may even want to buy a few different types of strips to find out what seems best for your home. | ||
| Permanent Link |
| ||
|
You can easily replace your existing recessed lights to new LED light bulbs by buying an LED light kit. If you currently have an incandescent, you will save over 80 percent the amount of energy. Beside this, an LED light bulb usually can last as long as 50,000 hours or more, so it can reduce long-term costs of buying new bulbs. As the new technology development, the cost of LED light bulbs are becoming lower and lower than before. For now, they are more affordable for people to use. Here we give you some instruction on how to replace recessed lighting with LED indoor lights. Step 2Separate the enclosure disk from the Edison base tri-clip which is on the retrofit fixture to allow room for installation. Then screw the retrofit Edison base into the socket on the existing housing assembly. Pull the wires inside the retrofit fixture can. Step 3place the tri-clip tabs into coordinating slots in the enclosure disk. And press the disk on the socket housing. Line up the enclosure disk notches with the housing clips. Bend the tri-clip tabs outward for a tight fit. Surround the socket housing and disk assembly inside the metal clamshell case. Align the two halves of the case with the guide tabs. Step 4Force open off only one set of adjacent removable tabs which provides the most ideal opening route for the housing-side conduit out of the case. Screw the case halves together where the two fastening holes align. Step 5Adjust the recessed can retrofit fixture clips to the highest point in the slot, and gently tighten it using wing nuts. Push the clamshell case, electrical connection, and leftover conduit into the ceiling. Place the can into the hole in the ceiling. Loosen the wing nuts on the can's clip. Pull the clip down and tighten the wing nuts, and repeat for all three clips. After these five steps, you can light your LED bulb up. And by the way, if you have some trouble in doing these, you can consult the manufacturer. You can provide you with more technology support. | ||
| Permanent Link |
Step 1Take out the existing light from the housing and remove the light housing from the pan. Unscrew the Edison socket housing. Then let the socket housing and conduit to be suspended through the hole in the ceiling.
| ||
 LED lighting and fluorescent lighting are just two of the types of lighting technologies available. There is no doubt that both of them have their own sets of advantages and disadvantages. To compare LED lighting and fluorescent lighting, you need to take a look at a few key specifications. Here are the key specifications we list below:TypesLED lights are light emitting diodes and are found either as single diodes, such as in a flashlight, or as a cluster of diodes to create a light bulb. The fluorescent lights usually have two types: tube lights and compact fluorescent lighting which is commonly called CFL. The fluorescent lights can range in size from tubes multiple feet long to compact bulbs that are about the size of a standard lamp light bulb.Energy ConsumptionLED light bulbs use about half the wattage of fluorescent lights, about 6 watts of power versus 14 watts of power for a CFL light bulb. For an LED bulb's lifespan, about 340 kilowatt hours of electricity is used. CFL bulbs used over 60,000 hours (6 bulbs) will use around 840 kilowatt hours of electricity.LifespanLED lights can last as long as 50,000 hours, comparing to the fluorescent lights which can last around 10,000 hours. You would have to replace the average CFL bulb 6 times to equal the lifespan of one LED light bulb.ConsiderationsBoth type of lighting can save energy when compared to traditional incandescent bulbs. And the price of LED lighting may be a little higher than the Fluorescent lights and CFL. But for the environment protection consideration, the CFLs and fluorescent bulbs can do harm to our environment because of the poisonous mercury while LEDs don¡¯t contain such harmful gases. LED bulbs are also more durable than fluorescent bulbs for their compact size.Lighting AbilityLED lights can work well for directional lighting. The light focuses on where the bulb is pointed rather than bathing the wider area in light. LEDs are also found in car headlights and electronic devices for status lights. The florescent light bulbs are ideal for lighting up full rooms. CFL bulbs are useful for home use and lighting up bedrooms and living areas. | ||
| Permanent Link |
| ||
When the Christmas comes, everyone loves to see the little twinkle of Christmas lights. But as the traditional Christmas lights have negative impacts on the environmental, more and more people turn to choose LED Christmas lights, for they are more energy-saving, and last longer than their incandescent counterparts. Here is comparison between the LED Christmas lights and the traditional lights. DurabilityThough they are only used a few weeks per year, the toll that the Christmas season takes on holiday lights can cause bulb to burn out quickly. However, the LED Christmas lights are more durable, perhaps for the reason that they utilize less electricity. Usually, a typical incandescent or fluorescent bulb can last approximately two thousand hours before burning out. However, an LED light, can last for four thousand hours and more. It means they can cut down replacement time as well as the costs. Another advantage of LED lighting is that they remain cooler than the traditional Christmas lights that have been known to overheat and cause fires.PriceBoth types of lights sell at relatively the same price. The retailers now offer kinds of LED lights for customers to choose, as they have realized that the LED lights can save approximately 33 percent power than the traditional incandescent ones.EnvironmentFor their long duration and energy-efficiency, LED Christmas lights are often championed by environmental advocates. They reduce the likelihood that the lights will cause a fire to a home. For the true environmentalist, there are even solar-powered LED lights, which can recharge in sunlight and can turn on automatically at night.TypesThere are a great many LED Christmas lights in virtually any shape and size. Some are shape as decoration items, such as snowmen, snowflakes, or candy canes. They also come in most traditional colors, ranging from multicolored strands to individual lights that can be purchased in red, green, blue, cool white and warm white. Some holiday decorations including LED light strips and decorative figurines are strung with LED lights. So just be sure that the retailer specifies the item you purchase contains LED lights. | ||
| Permanent Link |
| ||
It is not hard to assemble led light kit.
There are only a few steps to go through. In general, every LED
lighting kit includes a power source, a light fixture, a connector to
hook the light up to power. In the case of RGB lights, a kit always
includes a color controller. After you select a light, you need to
calculate how much power it requires. You can do that by multiplying the
number of feet or fixtures by the wattage.
LED Light Bar and Waterproof LED Strip Kits
| ||
| Permanent Link |
